Clicky

The myStorman Knowledgebase is for users of Storman v8 and v9. If you use Storman v10, please use our new Support Knowledgebase. | Dismiss for today

Setting up Access Control - via AccessEzy (#ACCSAE01)

Last updated:   Applies to:   In industries:   Of versions:   Special contents:
20120228 (Andy)   Pro, MultiUser, MultiSite, MultiView   Self Storage EditionMarina EditionVault Edition   7.X (and higher)   n/a

Setting up Access Ezy

  1. Select Maintenance, then Access Control Setup.
  2. Configure your Access Control setup screens as shown below (screenshots of both Tab 1 & Tab 2 are provided)...Tab 1 - AccessEzyTab 2 - AccessEzyNote: These are the default settings and may have been changed by the AccessEzy installer. Please check with your installer to ensure the above settings will work with your system.
  3. Once setup, click OK.
  4. Finally, ensure that your AccessEzy software is running, then restart StorMan. Test the system with your installer to ensure that the systems are communicating correctly.

 

 


 

Copyright 2017 Storman Software | Visit our new knowledgebase